Knowledgebase

Dedicated Servers

Self-managed dedicated servers: IP addresses and subnets, network setup, reverse DNS, firewall and locations

Articles

Dedicated Servers with additional IPv4 Updated 11 October 2026 Ucartz dedicated servers (IPv4 subnets /29 to /24) Ucartz unmanaged dedicated servers give you full root access, a choice of operating system and hardware, and fast connectivity. We also offer custom servers, where you... Dedicated server with extra IP addresses or paid sending credits: how to compare the cost Updated 4 November 2026 Self-managed dedicated servers If you send a lot of email, the price per message matters. Paid sending services charge by the volume or with credits. A dedicated server with a subnet (for example a... First steps after your dedicated server is delivered: a checklist Updated 4 November 2026 Self-managed dedicated servers with Ubuntu, Debian or AlmaLinux A self-managed dedicated server is delivered with full root access, and from that moment you are responsible for the operating system and the applications on it. Spend... Hardware RAID Explained: Controller vs Software RAID Updated 11 October 2026 AlmaLinux 9, Rocky Linux 9, Ubuntu 24.04 and Debian 12 Hardware RAID uses a dedicated RAID controller card (or the motherboard's controller) to combine disks. The operating system sees one disk, and the controller handles... How many IP addresses come with a dedicated server and what do additional subnets cost? Updated 4 November 2026 Self-managed dedicated servers (IPv4 subnets /29 to /24, cart prices of September 2026) How many IP addresses come with a dedicated server depends on the plan. Many plans include 1 usable IPv4 address, and some plans include 5 usable addresses (a /29... How many IP addresses do you need for your dedicated server? Updated 4 November 2026 Self-managed dedicated servers How many IP addresses do you need? Too few and you must reorganise later; too many and you pay for addresses you never use. This guide gives you a simple way to count,... How to add additional IPv4 addresses on AlmaLinux or Rocky Linux with nmcli? Updated 4 November 2026 Self-managed dedicated servers on AlmaLinux and Rocky Linux 9 AlmaLinux, Rocky Linux and other Red Hat based systems use NetworkManager. You add extra IPv4 addresses to the connection of your network card with the nmcli command.... How to add additional IPv4 addresses on Ubuntu with netplan? Updated 4 November 2026 Self-managed dedicated servers on Ubuntu 24.04 and 26.04 LTS Ubuntu configures its network with netplan. This guide shows two things: how to use extra addresses that use your main gateway (for example on a plan that includes 5... How to add additional IPv4 addresses on Windows Server? Updated 4 November 2026 Self-managed dedicated servers on Windows Server On Windows Server you add extra IPv4 addresses to the network adapter. You can do this in the graphical settings or with PowerShell. This guide shows both, how to keep... How to check whether a new IP address is on a blocklist before you use it? Updated 4 November 2026 Self-managed dedicated servers An IP address has a history: earlier users may have run services on it, and public blocklists may still list it. Before you put an important service on a new address,... How to choose the outgoing (source) IP address for a service, script or website? Updated 4 November 2026 Self-managed dedicated servers on Linux A server with several IP addresses uses its main address for outgoing connections unless you tell it otherwise. Sometimes you want a service to leave from a specific... How to get started with Console Redirection of an out-of-band-management? One of the most valuable features of an out-of-band-management is the option to interact with your server. This way, you can always make network changes or access the... How to order an additional IPv4 subnet for your dedicated server? Updated 4 November 2026 Self-managed dedicated servers, additional IPv4 blocks /28 to /24 If the IP addresses that come with your dedicated server are not enough (many plans include 1 usable IPv4, some include 5), you can add an additional subnet: /29 (5... How to run several websites on separate IP addresses with Nginx? Updated 4 November 2026 Nginx on Ubuntu 24.04 and 26.04 LTS With several IP addresses on one dedicated server you can give each website or application its own address. This is called IP-based hosting. Modern browsers and web... How to set reverse DNS (PTR) for many IP addresses and check forward-confirmed rDNS? Updated 4 November 2026 Self-managed dedicated servers with the Ucartz client area Reverse DNS (rDNS or PTR) turns an IP address back into a host name. Mail servers, security tools and many partner systems look at it, so it is good practice to set it... How to test that every additional IP address works on your server? Updated 4 November 2026 Self-managed dedicated servers on Linux and Windows After you add extra IP addresses to a server, test each one before you rely on it. Three things must work: the address is configured on the server, it answers from the... How to write firewall rules for a server with many IP addresses? Updated 4 November 2026 ufw, firewalld and nftables on Self-managed dedicated servers A firewall on a server with many IP addresses can treat each address differently: web traffic on one address, a database only for your office on another, nothing at... RAID Levels Explained: RAID 0, 1, 5, 6 and 10 for Servers dedicated servers with two or more disks; Linux software RAID (mdadm 4.4) and hardware RAID RAID combines several disks into one volume, either to survive a disk failure, to be faster, or both. The RAID level decides which. RAID is not a backup: it... Sending email from your own dedicated server: a checklist Updated 4 November 2026 Self-managed dedicated servers that send email (Postfix) A common reason to run a dedicated server with several IP addresses is to send email yourself: application mail, order confirmations, newsletters or a mail system for... Software RAID on Linux: mdadm Levels and Status Check Updated 11 October 2026 AlmaLinux 9, Rocky Linux 9, Ubuntu 24.04 and Debian 12 Software RAID uses the server's operating system (on Linux, mdadm) to combine several disks into one array. No special controller is needed. Common levels RAID 1: two... Subnet Mask Cheat Sheet: CIDR Prefixes, Netmasks and Usable Hosts Updated 20 October 2026 A subnet mask says which part of an IPv4 address is the network and which part is the host. It is written either as a mask (255.255.255.0) or as a CIDR prefix (/24):... Ucartz dedicated server locations, IP address rules and additional IP support Updated 4 November 2026 Ucartz dedicated servers Ucartz offers dedicated servers in many countries. You choose the location when you order, and the IP addresses that belong to the server are tied to that location....