Flussonic Server Hosting Sized for Real Transcoding Loads.
Bare metal with the processor headroom transcoding requires, uplink capacity for real channel counts, and storage for recording and catch up. Delivered with a 10-day Flussonic trial licence.
Built for Operators.
Infrastructure sized specifically for IPTV providers, OTT platform operators, systems integrators, and media server migrations.
IPTV Service Providers
Delivering television channels to subscribers, often with catch up and recording. Channel count and transcoding load determine the hardware more than anything else.
Over the Top Platform Operators
Streaming direct to viewers across devices and networks, where adaptive bitrate delivery is essential rather than optional.
Systems Integrators
Building and running services for broadcast clients, where hardware needs to be right the first time and the timeline is not yours.
Operators Migrating Media Servers
Moving from another media server and needing infrastructure sized correctly for the new one rather than inherited from the old.
Where the Server Sits Matters.
For television delivery, the distance between the server and the audience shows up directly as start time and rebuffering, particularly on mobile networks. If your subscribers are concentrated in one region, the server should be near them.
If they are spread across several, that is a distribution conversation rather than a single server conversation. Tell us where your audience is before choosing a location, because it is much harder to change afterwards.
Sized by Channels, Transcoding and Viewers.
Four numbers determine the machine: how many channels you ingest, how many of those need transcoding and into how many profiles, your peak concurrent viewers, and how many hours of recording you need to retain.
The first two set the processor requirement, the third sets the uplink, and the fourth sets the storage. Send us those numbers and we will specify it rather than guess.
| Server | Processor | RAM | Storage | Bandwidth | Price / mo | Order |
|---|---|---|---|---|---|---|
|
Starter
Suits restreaming and DVR recording in the USA: 8 TB of storage for recordings and a 1 Gbps port. Flussonic installed with a 10-day trial; you buy your licence from Flussonic
Vint Hill (USA)
|
Xeon E-2136 6 cores · 12 threads |
64 GB · DDR4 ECC | 2 × 4 TB HDD RAID 1 ready |
1 Gbps unmetered |
$112.99
/mo
or $103.95/mo paid yearly Save 8% yearly Renews at the same price
|
|
|
Server
Location
Included
|
||||||
|
Basic
Suits transcoding a few channels on the chip with Intel Quick Sync, which Flussonic supports, in Finland. Flussonic installed with a 10-day trial; you buy your licence from Flussonic
Finland
|
Core i5-13500 14 cores · 20 threads |
64 GB · DDR4 | 2 × 512 GB NVMe RAID 1 ready |
1 Gbps unmetered |
$153.99
/mo
or $141.67/mo paid yearly Save 8% yearly Renews at the same price
|
|
|
Server
Location
Included
|
||||||
|
Plus
Suits transcoding with Quick Sync plus long DVR retention: NVMe for the system and 12 TB of disk for recordings, in Canada. Flussonic installed with a 10-day trial; you buy your licence from Flussonic
Canada
|
Xeon E-2386G 6 cores · 12 threads |
64 GB · DDR4 ECC | 2 × 512 GB NVMe + 2 × 6 TB HDD |
1 Gbps unmetered |
$225.99
/mo
or $207.91/mo paid yearly Save 8% yearly Renews at the same price
|
|
|
Server
Location
Included
|
||||||
|
Elite
Suits large networks and resellers: 12 fast cores and 64 GB on NVMe, in France, the UK or Poland. Flussonic installed with a 10-day trial; you buy your licence from Flussonic
UK, France, Poland
|
Ryzen 9 5900X 12 cores · 24 threads |
64 GB · DDR4 ECC | 2 × 960 GB NVMe RAID 1 ready |
1 Gbps unmetered |
$312.99
/mo
or $287.95/mo paid yearly Save 8% yearly Renews at the same price
|
|
|
Server
Choose a location
Included
|
||||||
|
Ultra
Suits the busiest networks: 24 cores and 128 GB of ECC memory on NVMe, in Roubaix, France. Flussonic installed with a 10-day trial; you buy your licence from Flussonic
France
|
EPYC 7413 24 cores · 48 threads |
128 GB · DDR4 ECC | 2 × 960 GB NVMe RAID 1 ready |
1 Gbps unmetered |
$470.99
/mo
or $433.31/mo paid yearly Save 8% yearly Renews at the same price
|
|
|
Server
Location
Included
|
||||||
|
Global
Our most powerful build: 48 cores for large IPTV and OTT operators. On request we go further: more memory, a 10 Gbps port, GPU transcoding or several servers. Flussonic installed with a 10-day trial; you buy your licence from Flussonic
France
|
EPYC 9455 48 cores · 96 threads |
128 GB · DDR5 ECC | 2 × 1.92 TB NVMe RAID 1 ready |
1 Gbps unmetered |
$791.99
/mo
or $728.63/mo paid yearly Save 8% yearly Renews at the same price
|
|
|
Server
Location
Included
|
||||||
| No plans match your search. | ||||||
These servers have two drives of the same size. On request we set them up as software RAID 1: both drives hold the same data, so the server keeps running if one drive fails, and usable space becomes the size of one drive. RAID protects against a failed drive, not against deleted files or a bad update, so keep a backup of your data as well.
CPU score: PassMark CPU Mark average for that processor, read on 5 November 2026; higher is faster. For radio, the port speed usually sets the limit before the processor does.
WORKS WITH
Why Sizing Matters More Here Than Anywhere Else.
Most hosting workloads are forgiving. A media server doing live transcoding is not. Transcoding is genuinely processor intensive, and the number of channels a machine can transcode simultaneously depends on the processor, the codecs and the output profiles rather than on any tier name.
Meanwhile the delivery side is bandwidth bound: every concurrent viewer consumes their profile's bitrate for as long as they watch. Those two demands pull in different directions, which is why a server chosen only for bandwidth will disappoint on transcoding and a server chosen only for processing will run out of uplink. Tell us your channel count, your transcoding profiles and your expected concurrent viewers, and we will size for both.
Processor Headroom for Transcoding
High Capacity Uplink
Storage for Recording
Bare Metal Hardware
Root Access
DDoS on Selected Servers
What We Handle and What Stays Yours.
We deliver the server with Flussonic Media Server installed on a 10-day trial licence, usually within 2 to 6 business hours (at most 46), with full root access and Free Basic Managed Support for quick tasks. Your channels and transcoding stay with you or your integrator; Catena or Watcher on request.
If you need help at that layer, or want us to run the server, hire our engineers from $8 per 15 minutes or $28 per hour, or by the month.
Contact UsWhat Operators Use It For.
Key streaming capabilities Flussonic Media Server provides for television and IPTV operations.
Live Channels With Adaptive Delivery
Multiple quality profiles generated from a single source so viewers on any connection get a watchable stream. This is where transcoding load comes from and it is what the hardware must be sized around.
Recording and Catch Up
Continuous recording so viewers can pause, rewind or watch a programme after it aired. This consumes storage steadily and predictably, and it is the requirement most often underestimated at the sizing stage.
Multiple Delivery Protocols
Delivery to browsers, mobile applications and set top boxes across the protocols each requires, from a single ingest. The practical benefit is not needing separate infrastructure per device type.
& Support
About the Software Licence.
Worth settling before anything else, because it is the largest variable in your monthly cost. Flussonic Media Server is commercially licensed by its vendor and the licence is a significant cost in its own right, independent of the hardware it runs on.
Every server comes with a 10-day Flussonic trial licence so you can test it. After that you buy your Flussonic licence from the vendor, or bring one you already have; it is not part of the server price.
Flussonic in 2026, in Plain Words.
Flussonic, the company formerly known as Erlyvideo, has moved its product line on. Here is what that means for a server you buy today.
Media Server: still supported
Flussonic Media Server is what we install by default. Flussonic still ships fixes for it (version 26.10, October 2026) and says it stays supported, so it is a safe choice today.
Catena for IPTV and OTT
New TV and OTT services are pointed to Flussonic Catena: streaming, middleware, apps, DRM and timeshift in one product.
Watcher for cameras
Video surveillance, recording and IP cameras are handled by Flussonic Watcher.
A new streaming core
Catena and Watcher run on Sapsan, Flussonic's new streaming core written in Rust. According to Flussonic, active development of Media Server ended with version 26.08 (August 2026): it gets security updates, and new features go into Catena and Watcher.
Our servers run all of them
The same dedicated servers run Flussonic Media Server today and Catena or Watcher when you move. The hardware does not change; the licence does. Flussonic says it converts Media Server licences to Catena licences and works out the terms for each installation.
Licence from Flussonic
Flussonic no longer lists Media Server subscription or perpetual prices. It points specialised uses to Catena, Watcher, Mcaster or Agora, and offers a developer limited licence from $100 at my.flussonic.com. Ask Flussonic for a quote: the licence is separate from the server.
You May Not Need Flussonic at All.
Four ways to stream video with Ucartz, from one channel on a shared server to a full operator platform. Pick by what you actually stream.
Shared video streaming
One channel live from OBS, with recordings, on a shared server. The lowest cost way to start.
VDO Panel dedicated server
Run 24/7 TV channels from a playlist, go live from OBS and restream to YouTube and Facebook at once, with a reseller panel.
Flussonic dedicated server
IPTV and OTT, many channels, transcoding, DVR and CCTV recording, with the Flussonic licence you choose.
Red5 dedicated server
Open source Red5 for RTMP live streams; real-time WebRTC for auctions, classes and two-way video needs a Red5 Pro licence.
Plan bandwidth from your peak viewers: viewers times bitrate, plus about 30 percent headroom. One hour of 720p at 3 Mbps is about 1.35 GB per viewer.
From Specification to Live.
Hardware chosen and configured for your exact channel count and transcoding requirements.
Choose Your Server
Pick a plan from the table, or send us your channels, transcoding profiles, peak viewers, recording retention and audience location and we suggest one.
Order and Pay
Order online, monthly or for 3, 6 or 12 months. Global is set up on request, so start with a message.
We Build It, You Go Live
We install the operating system and Flussonic with its 10-day trial, usually within 2 to 6 business hours. You add your Flussonic licence and set up your channels.
Video streaming under your own brand.
Your viewers see your channel, your player and your name, never ours.
No Ucartz branding
Our name appears nowhere your customers can see: not in the panel, the player or the stream.
White-label hostnames
Your services run on neutral, white-label hostnames, never on a Ucartz domain, so customers only ever see your brand.
Your player, your look
Brand the player and pages you embed on your own site.
Resell it freely
Producing streams for clients? Resell the service under your own name.
Every Ucartz service is 100% white label. Hosting, radio and video streaming run on white-label hostnames, and anything you buy from us, Hire an Expert work included, can be resold or outsourced under your own name.
Real Feedback From the Businesses We Support
See how our engineering support and infrastructure keep real businesses online.
Flussonic streaming server, with engineers on call
A silent stream loses listeners fast. Every Flussonic streaming server includes Free Basic Managed Support, and if something bigger breaks, or you want new features, you can call in a streaming engineer for one job without signing a support contract.
Free Basic Managed Support
Complimentary, best-effort help with quick tasks of about 5 minutes: panel access, stream and port checks, encoder connection help, DNS pointing, service restarts and first-level troubleshooting.
What is included →Plug-and-play expert help
AutoDJ setup, migrations, relays, custom players or emergency recovery. From $8 per 15 minutes or $28 per hour, only when you need it.
See on-demand support →AI, automation & custom builds
Grow the station: automated scheduling, listener stats dashboards, website and app players, and n8n or AI workflows for show prep and social posts.
Plan a project →Frequently Asked Questions
Quick answers about the plans, support and billing.
Send Us Your Channel Count and Profiles.
Dedicated servers for Flussonic with a 10-day trial licence, usually ready in 2 to 6 business hours.