Scenario:


If you've already enabled AutoDJ and configured your default rotation playlist, but starting your stream does not turn on AutoDJ this can be due to your relay configuration. With Centova, when you've configured a relay, the remote stream will take precedence as the source over your AutoDJ. As a result of this, restarting your stream will cause your server to reach out and attempt to find the remote stream as a source, rather than enable AutoDJ as you've configured it.

 

You will likely see something similar to the following error in your Source Log file:

 

Error during send: Mount failed on http://[ip]:[port]/autodj, error: Couldn't connect

 

The Fix

To resolve this problem you will need to remove all relaying configuration in Centova. So let's!

  • Login to your Centovacast and choose the radio for which you're encountering this problem.
  • Choose "Configure Server" then select the Relaying tab.
  • If there are any values under "Stream server" or "Stream port", remove them and click the "Update" button.
  • Choose Restart Server.

 

Assuming you have configured AutoDJ correctly, once the server has restarted it will automatically connect your AutoDJ source and your stream will be live!

 

Hasznosnak találta ezt a választ? 0 A felhasználók hasznosnak találták ezt (0 Szavazat)