Step 1 - Login to the target system by using IPMI web GUI (Java is required).

  • Login - ADMIN
  • Password - ADMIN

Step 2 - Go to the tab “Remote Control” and select “Console Redirection”.

 

Step 3 - Click on “Launch Console”.


 

Step 4 – A small file “Launch.jnlp” will be downloaded, run the file, and open the remote window.

 

Step 5 – In the remote window, go to “Virtual Media” and select “Virtual Storage”.

 

Step 6 – Select “Logical Drive Type”, typical drive type is “ISO”.

 

 

Step 7 – Click “Open Image” to select the image file location, could be local in your PC or network shared drive.

 

Step 8 – Click “Plug in” and then click “OK” to mount the virtual drive, Device connection is now plugged-in, the setup is now done.

** Click "Plug out" to unmount it.

 

 

Step 9 – Reboot the system. Press <F11> when the BIOS bootup option display.

 

 

Step 10 – Select the boot device to “Virtual CDROM”.

 

Step 11 – System will boot up from the virtual CD-ROM and now you can start the OS installation

 

 

這篇文章有幫助嗎? 0 Users Found This Useful (0 Votes)