Rootkit Hunter (rkhunter) is a Unix-based tool that scans for rootkits, backdoors and possible local exploits.

Rootkits are self-hiding toolkits secretly installed by a malicious intruder to allow that user to gain access to the server. Rootkit Hunter offers protection by comparing SHA-1 hashes of important files with known goodones in a online database as well as:

    • MD5 hash compare
    • Look for default files used by rootkits
    • Wrong file permissions for binaries
    • Look for suspected strings in LKM and KLD modules
    • Look for hidden files
    • Optional scan within plaintext and binary files

1. Installation

1.1 Download Rootkit Hunter

Begin by downloading the latest stable version of Rkhunter by using the wget command. The /usr/local/src folder is where you should put any programs (source or binary) you've downloaded before installing them.

cd /usr/local/src
wget http://dfn.dl.sourceforge.net/sourceforge/rkhunter/rkhunter-1.4.2.tar.gz
wget http://dfn.dl.sourceforge.net/sourceforge/rkhunter/rkhunter-1.4.2.tar.gz.sha1.txt
sha1sum -c rkhunter-1.4.2.tar.gz.sha1.txt

1.2 Installation Rootkit Hunter

Once you have downloaded the latest version of Rootkit Hunder, issue the following commands as root to start the installation routine.

tar -zxvf rkhunter-1.4.2.tar.gz
cd rkhunter-1.4.2
./installer.sh --layout default --install 
/usr/local/bin/rkhunter --update
/usr/local/bin/rkhunter --propupd
rm -Rf /usr/local/src/rkhunter*

2. Automate Rootkit Hunter

Rkhunter can be setup to run checks every day so that we always have up-to-date information about intrusions. This can be accomplished by creating a cronjob.

2.1 Create Cron File

Create the run-file in the following location (RHEL based distributions only):

nano -w /etc/cron.daily/rkhunter.sh

2.2 Insert Shell Script

The script below can be configured to send email notifications to a specified email id. The --versioncheckchecks our threat definitions are up to date. The --update option updates our threat definitions, if required. The --cronjob option tells rkhunter to not require interactive key presses. You need to insert this short shell script to the rkhunter.sh file we have just created.

#!/bin/sh
(
/usr/local/bin/rkhunter --versioncheck
/usr/local/bin/rkhunter --update
/usr/local/bin/rkhunter --cronjob --report-warnings-only
) | /bin/mail -s 'rkhunter Daily Scan Report (PutYourServerNameHere)' your@email.here

Important: Remember to change: (PutYourServerNameHere) AND your@email.here to a valid server name / e-mail address

 

2.3 Set Execute Permissions

Set execute permission on the file you have just created:

chmod 755 /etc/cron.daily/rkhunter.sh

The cron utility will run once daily, and if a threat is detected, the rkhunter command itself will email our user to alert them. If no problems were found, no email will be received.

 

3. Rootkit Hunter configuration

The configuration file for rkhunter can be found at:

/etc/rkhunter.conf

3.1 SSHD Root Logon

The parameter ALLOW_SSH_ROOT_USER tells rkhunter whether or not the root user is allowed to ssh into the system. This is unset by default in the rkhunter.conf file. Rkhunter will complain about this on every run. If you have disabled root login, you should set this parameter to "no".

ALLOW_SSH_ROOT_USER=no

If you need root login over SSH, you should change this parameter to "yes" so that rkhunter can check this and will mark this setting as valid:

ALLOW_SSH_ROOT_USER=yes

Security practices recommend disabling root login.

4. Update rkhunter

To check the currently installed version enter the following:

# /usr/local/bin/rkhunter --versioncheck

Run the updater by issuing the following command:

# /usr/local/bin/rkhunter --update

With our database files refreshed, we need to tell rkhunter to check the current values and store them as known-good values:

# /usr/local/bin/rkhunter --propupd

 

5. Manual Scan

You can initiate a manual scan by issuing the following command:

/usr/local/bin/rkhunter -c 

Which runs rkhunter in interactive mode. In other words, when it gets to the end of a particular scan, you need to press 'enter' to continue. If you want to "auto skip" interactive mode, add the -sk option at the end:

/usr/local/bin/rkhunter -c -sk

To scan the entire file system enter:

rkhunter --check

 

Your scan results should look as follows:

---------------------------- Scan results ----------------------------
 
MD5 scan
Scanned files: 0
Incorrect MD5 checksums: 0
 
File scan
Scanned files: 412
Possible infected files: 0
 
Application scan
Vulnerable applications: 0
 
Scanning took 39 seconds
 
-----------------------------------------------------------------------



Răspunsul a fost util? 0 utilizatori au considerat informația utilă (26 Voturi)